Nitro RC Nation
Welcome to Nitro RC Nation.

Registering with our site is easy and completely free. Registration provides you with the ability to join in on the public discussions, communicate with other members via private messages, respond to polls, upload your photos and videos, post to your own blog, buy and sell RC gear in the classifieds area, and much more. If you have any problems with the registration process, please contact us for additional help.

If you've previously registered, please log in using the log in form.
Nitro RC Nation

Welcome to Nitro RC Nation Forums.This is a web site about RC Cars.


You are not connected. Please login or register

Team Associated 12R5.1 Factory Team Kit

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Team Associated 12R5.1 Factory Team Kit on Wed Aug 19, 2009 11:01 am

Luis

avatar
Admin


New from Team Associated:

The
Factory Team 12R5.1 is the latest evolutionary step in Associated’s
twenty-five years of 1:12 scale racing history. New for the RC12R5.1 is
the wide three-point rear pod that has been optimized for fitting
brushless motors as well as heat dissipation. The 12R5.1 is built on a
2.5mm woven carbon fiber chassis that utilizes a pivot-ball link rear
suspension that allows for independent adjustments for chassis roll,
bump, and alignment.

Having the ability to make these chassis
adjustments independently gives the 12R5.1 greater potential for the
best possible handling on any track surface. While testing, the
pivot-ball link chassis has proven to be more durable in high-speed
impacts and excels in bumpy track conditions.

The 12R5.1
features shocks with a through-shaft design providing equalized damping
throughout the full stroke of the shock in both directions without any
unwanted rebound. The center shock tower has four mounting positions
that split the spring rates for even finer adjust-ments. The center
shock also controls the chassis droop and can be adjusted on the car
with a turnbuckle wrench, making it easier and quicker to get dialed in.

The
12R5.1’s “Active Strut” front end has been optimized, featuring
symmetric components with adjustable caster and track width, as well as
a front axle with wheel nut. Factory Team blue aluminum servo mounts
position the servo flat on the chassis for a lower center of gravity
and include Ackermann adjustment spacers. The foam front bumper helps
protect body and chassis during impacts.

The 12R5.1 comes ready
for brushless with a new optimized wide rear pod. The rear pod features
a woven carbon fiber top plate and Factory Team blue aluminum machined
motor mount, left side bulkhead and motor mount standoff. The woven
carbon fiber top plate attaches to the motor mount and left side
bulkhead at three points, and uses an integrated standoff, making the
rear pod more rigid. Front-to-rear chassis balance is optimized at the
center of the battery, allowing an easy transition to 3.7V LiPo
batteries.

12R5.1 Factory Team features:

  • Wide rear pod allows easy installation of brushless motors and features Factory Team blue aluminum machined motor mount,
  • left side bulkhead, and standoff.
  • Accepts single-cell LiPo battery packs without changing the front-to-rear weight bias.
  • Factory Team shocks feature a through-shaft design, making for equal damping with no rebound in both directions.
  • Active strut front end features symmetric components with
    adjustable caster and track width, as well as a new front axle with
    wheel nut.
  • Woven carbon fiber center shock tower allows for incremental adjustments of rear spring rate.
  • Factory Team pivot ball-link chassis allows for independent adjustment for roll, bump, and alignment.

#4019
12R5.1 Factory Team Kit
MSRP: $369.99
Availability: August 2009

View user profile http://nitro-rc-nation.forumotion.com

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum